wait what? 7.0 Final is latest :D

Hello all, has somebody issues with the download speed after installing newsleecher in windows 10 ? The speed will not get higher than 1 Mbps :(

Thanks

I believe there's a new nzb format or something as when I import the .nzb file only a few files are loaded. I went into alt.binz v.039 and imported the same .nzb and all files were loaded. if OPs wants me to send .nzb file let me know. Thanks.

I'm not sure what I did but I cannot seem to locate the setting that would pause .par files in a set when you import a .nzb and only download the needed par to fix a bad set. Someone please show me the light. Thanks.

Edit: I found it, under Unpacker tab, it was NOT enabled

How can I download Newsleecher V8 Beta Release?

Since the majority of changes are most likely GUI-related .. here's one cosmetic issue:

After changing Listview Background Color the Unpacker Tab receives the short-end of that stick.
While every coloumn would receive the newly set color, the very first PAR2 File Set keeps the Default (while)...

After a recent computer rebuild I upgraded from Newsleecher 4.0 final to 7.0 beta7 (quite a jump I know!).

I often import .NZB file with date in their name like this Name (2015-05-02) - Description.znb and I've setup the NZB Import destination folder to something like C:\download\<NZB...

First time anything on my new pc ever runs out of memory (usually followed by a series of dialogues with data error , oh and a range check rror for good measure).

I've got 32GB, of which 28GB is free.

Bug report dialogue hopefully sent its data to the author. Not sure if that actually...

Using Newsleecher v7 beta 15
I am getting these 2 repeating errors when downloading. Every few seconds it pops up.
----------------------------------
Bug ID:
renfi.0

Bug Data #2:
System Error. Code: 3.
The system cannot find the path specified

-----------------------------
Bug ID:...

Please remove the Spam from this group

When R&E is enabled, there's no choice but to have NL download all zero-block par2 files right away, as soon as they appear in the queue, whether on top or at the end. This is highly undesireable, because it makes R&E extremely slow once a certain large number of parsets have been added. It...

In the group browser, try selecting a filter by hitting Tab (to go the the filter dropdown) and then Alt+Down to pop up the list of previously used filters. Now use the arrow keys to select one. So far so good.

Now try to press Enter or Esc or Tab to back out. Enter should actually select a...

We have large monitors these days. 1440p is becoming mainstream for powerusers. Newsleecher doesn't use very much screen real estate, which is fine. But as a result, I noticed how much negative space the connections pane has. I'm sure that even on my mere WUXGA monitor it can display connections in...

Since upgrading from (possibly b12) I sometimes get a complete computer slow down when downloading. The mouse becomes minimally responsive and makes the computer virtually unusable.

I have an i7 with 6GB of RAM + SSD and have never had any past issues with slow down on any other version of NL...

V7b12 Win 10 Pro

Articles Tab a.b.etc or Supersearch

Example: Search posts by Poster: kingof@pr0n.net

some rename others do not.

Quickpar renames without a problem.

Hi

I experimented this week with SuperLeech and found it (unfortunately) pretty useless.

1) My pc falls asleep (as most modern computers do) when not in use for some time, and NewsLeecher does not cope with that as it displays a nice popup it cannot connect when resuming (so does not resume...

NewsLeecher v7.0 Beta 15

Bug ID:
14u10p01k

Bug Data #2:
Access violation at address 00D09261 in module 'NewsLeecher.exe'. Read of address 73656976

have to reboot NewsLeecher to rid this message which is constant

Whenever I connect, after about 10 seconds I get a pop-up with Bug Issue 14y10e28z - once I clear that, I get another dialogue box that reads:-

Newsleecher has disconnected, because a temporary download file could not be created

Error Message:
The system cannot find the path specified...

7.0 b15 ufr#1: routinesly crashing on updates, no crash reports possible as have to Task Manager End Task to get out of it.

Sad the product continues to be so unstable.

I've had this before, can't remember which version it was or how it was resolved, but just started happening again after upgrade to b15.

Any keypress made while the main NL window is active will minimize the app to the tray! If i try to type in the search or filter boxes it happens, but even...

I've got an NZB file with ~100'ish files in it. However, in file 76 the parser hits an
Error Importing NZB segment, as number part is missing or wrong. < 20a9c92d40acb4c61d8f12cf54c70908.76 >
and NewsLeecher stops importing the rest of the NZB. When I reorder the NZB file to move files 77-...

I am getting SPINLOCK_1231 errors every few minutes when downloading with beta 13.
Any idea, what this error means?

I constantly get these errors which stopped downloading anything else and stopped Repair and Extract until i close it and start it again. I've done the F12 to not load any settings files at start then close and relaunch with still the same effect almost every morning.

I'm on 7.0b14 and I've had...

nl70015.ufr1 and previous v.7

repeatable error:

1. create SuperSearch (any) with MB or GB size designation - example: example.search MinMB:500
2. click Advanced Searching icon - Advanced Searching shows proper search entries.
3. Click OK

Search changes to: example.search MinKB:500...

Since the latest beta made changes to the repair/extract. It seems nobody hit this bug, or it's just on my client.

Whenever repair and extract is enabled. Ram usage increases by around 5MB every time the Extract tab window refreshes and never releases the ram. This means It will keep increasing...

Some bots occasionally get stuck at
Locating group header range up to 120,0 days of age (/)
With virtually zero CPU, I/O or network activity on newsleecher.exe.

The previous version I used, NL 7.0 beta 7, never showed this behaviour, so I can only assume this is a bug introduced somehwere...

Bug ID:
lkjdlajs.V002

Bug Data #1:
808465969 : 147 : 4096

Bug Data #2:
Access violation at address 00406C4B in module 'newsLeecher.exe'. Read of
address 35148685

This isn't a big deal but the bug has been present for a long time.

Bug ID:
SPINLOCK_1231

Hi all,

since the last beta i have some problems regarding the download speed.
when i restarted the client and there are many files in the queue - the speed is at max.
but when the queue is empty, and after some hours the queue is full again, the speed is less than half...
after a reboot the...

Upon installing beta 13 over beta 12, the app crashes instantly.

I get: Runtime error 216 at 00409176

Using Windows 7 enterprise, SP1

I cannot find beta 12 to revert to, is it possible to download older versions still?

nl 7 beta 13
at every download i get this error, and nl stops verifying files and downloading.

Bug ID:
14t10p07s

Bug Data #2:
Access violation at address 1000181E in module 'nlpar.dll'. Read of address 00000030

Hi,

Using beta 13 (and priors ones too) I noticed a (very) small inconvenience: if you select an entry in the Recent Searches and use the right click menu to delete it, the Show Prior Matches field turns itself on.

I have to reset it every time I delete an entry.

I installed beta 12 over beta 10 which has been working fine for a long time.

After first launch of beta 12, I successfully logged in with my password, and did a few searches. Then it hung. Had to kill program to exit.

Now whenever I launch beta 12, I get program not responding upon startup...

NL7 b12 (occurred on many before) Win 10 Pro

R&E stops working when two entries for the same d/l is listed ( d/l name with -1 added). Verify of second entry starts and R&E stops working Verifying 8%. A restart is required to get R&E working again and to prevent another R&E...

Would be nice to see them go away...

When updating groups:

Bug ID:
cmjtystxw

Bug Data #2:
Integer overflow

V7B10UFR6

Disabling Repair & Extract enabled option does not stop R&E from doing anything. Only stops it from continuing pass a point.

Step 1 can not be stopped.

Steps:
1. Ready to initialize. <-- can not stop the scanning of the process queue
2. Verify
3. Repair
4. Extract...

After succesfull extraction in the Default R&E Destination Folder , The Default Download Destination Folder is not cleaned up properly.
The files in the subfolder are removed, but the folder itself still remains.

In the following example:

NL Default Destination Folders.JPG
After...

FU NewsLeecher! 2.jpg

Oh come on - WTF this is disgraceful, despicable, & JUST WRONG!!

I accidentally deleted the .rar and .par files for a file set while they were being verified in extract/repair. The entry in the Repair/Extract queue status is stuck on Verifying (0)%. I can't close the program, it gets stuck on Waiting for Repair and Extract to Finish.

I have tried stopping...

Can anyone tell me how I can re-download files that have been marked with a status of download ?

Thanks in advance.

I'm not getting and results from SuperLeech or SuperSearch in the last day or so. I am able to download headers and see what I'm searching for right there. Is anyone else having this issue?

Hi all,

I'm trying to post something, but I am prompted to select an usenet message group. However, the list remains empty.
I cannot find any post on the forum regarding this, but than again there are a lot of posts but the search doesn't seem te find anything.

Very well posible that I'm...

When NL 6 or 7 encounters an article that is spam, the entire top part of the program flashes yellow -- and there's no way to make it stop except to exit the program. This is very annoying. :shock: There has to be a better way. Is there a setting I'm not seeing?

I installed 7.0 beta 10 a few days after it went live in December.
For the first couple of months all was well.
Starting maybe 3 weeks ago it takes 30 or more seconds between when the splash screen comes up and the wings bounce down. The splash screen is in front and covers everything, can't do...

This bug has been around for quite some time. I believe I have reported this error previously.

When posting either new or replies NewsLeecher errors - says that the server does not allow posting (occasionally works ok).

When restarting the computer and restarting NewsLeecher then when...